{"id":3527,"date":"2026-10-25T22:57:04","date_gmt":"2026-10-25T21:57:04","guid":{"rendered":"https:\/\/skyswitchpro.com\/?post_type=product&p=3527"},"modified":"2026-10-27T10:00:33","modified_gmt":"2026-10-27T09:00:33","slug":"skyswitch-pro-net-for-10micron-mounts-v3-controller-version","status":"publish","type":"product","link":"https:\/\/skyswitchpro.com\/index.php\/produkt\/skyswitch-pro-net-for-10micron-mounts-v3-controller-version\/","title":{"rendered":"SkySwitch PRO NET for 10Micron Mounts \u2014 V3 Controller Version"},"content":{"rendered":"
\n

SkySwitch PRO NET for the 10Micron V3 controller<\/strong> is a network-connected control and synchronization unit designed for remote and unattended observatories. It combines mount power control, GPS\/PPS-based synchronization and live environmental data in one compact device.<\/p>\n

This hardware variant is equipped with an integrated 1.5 m control cable terminated with a 6-pin AUX connector<\/strong>, as required by supported 10Micron V3 controllers. The cable is used by SkySwitch PRO NET to remotely switch the mount on and off and to provide direct hardware-status monitoring.<\/p>\n

During normal operation, SkySwitch PRO NET communicates over wired Ethernet and continues performing its configured functions without requiring the Windows application to remain open.<\/p>\n

Network-native observatory control<\/h3>\n
    \n
  • Remote mount power control<\/strong> \u2014 safely switch the mount on or off over the network using the integrated AUX control cable.<\/li>\n
  • Direct hardware-status monitoring<\/strong> \u2014 monitor the operating state of a compatible V3 controller through the dedicated AUX interface.<\/li>\n
  • Native Ethernet connectivity<\/strong> \u2014 direct TCP\/IP communication for reliable remote operation and diagnostics.<\/li>\n
  • Integrated GPS and PPS<\/strong> \u2014 provides validated UTC timing and geographic position data.<\/li>\n
  • Time and location synchronization<\/strong> \u2014 synchronizes UTC time, latitude, longitude and elevation with the mount.<\/li>\n
  • Environmental monitoring<\/strong> \u2014 supplies live temperature, pressure and humidity data for atmospheric refraction correction.<\/li>\n
  • Autonomous operation<\/strong> \u2014 configured synchronization and monitoring functions continue even when the Windows application is not running.<\/li>\n
  • Dark Mode<\/strong> \u2014 allows the Power and GPS indicators to be switched off for use near sensitive astronomical equipment.<\/li>\n<\/ul>\n

    Designed for the 10Micron V3 controller<\/h3>\n

    This version of SkySwitch PRO NET is intended for compatible 10Micron mounts equipped with a V3 controller and 6-pin AUX connection<\/strong>. The integrated 1.5 m AUX cable provides the dedicated hardware connection required for remote mount power control and direct controller-status monitoring.<\/p>\n

    Mount communication, operational data exchange and synchronization are performed over the native 10Micron TCP\/IP interface.<\/p>\n

    Please check your controller and connector type before ordering.<\/strong> If your mount uses a V2 controller with a 3.5 mm jack connection, select the dedicated SkySwitch PRO NET V2 version instead.<\/p>\n

    Simple configuration and reliable daily operation<\/h3>\n

    Initial network configuration is performed through the dedicated USB SERVICE<\/strong> connection using the SkySwitch PRO NET application for Windows 11. Once a static network address has been saved to the device, normal operation requires only power and a wired Ethernet connection.<\/p>\n

    The application provides separate connection status for SkySwitch PRO NET and the mount, access to live GPS\/PPS and environmental data, manual synchronization controls and configuration of autonomous operation.<\/p>\n

    Built for remote observatories<\/h3>\n

    SkySwitch PRO NET was developed specifically for installations where dependable remote access is essential. Automatic connection and reconnection, autonomous synchronization and device-stored settings allow the system to resume normal operation after a computer or network restart.<\/p>\n

    For best GPS performance, install the device where its integrated antenna has a clear view of the sky.<\/p>\n

    What is included<\/h3>\n
      \n
    • SkySwitch PRO NET V3 device<\/strong><\/li>\n
    • Integrated 1.5 m mount control cable<\/strong> with a 6-pin AUX connector for remote switching and controller-status monitoring<\/li>\n
    • 6 V mains power adapter<\/strong><\/li>\n
    • 1.5 m Ethernet cable<\/strong><\/li>\n<\/ul>\n

      Key requirements<\/h3>\n
        \n
      • Compatible 10Micron mount with a V3 controller<\/li>\n
      • Available 6-pin AUX connection<\/li>\n
      • Wired Ethernet network<\/li>\n
      • Available static IPv4 address for SkySwitch PRO NET<\/li>\n
      • Windows 11 computer for initial configuration, monitoring and firmware updates<\/li>\n<\/ul>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

        Network-connected control and synchronization unit for 10Micron mounts equipped with a V3 controller.<\/strong><\/p>\n

        Provides remote mount power control, direct controller-status monitoring, integrated GPS\/PPS synchronization, environmental data and autonomous operation over wired Ethernet.<\/p>\n

        This V3 version includes an integrated 1.5 m control cable with a 6-pin AUX connector<\/strong>, a 6 V mains power adapter<\/strong> and a 1.5 m Ethernet cable<\/strong>.<\/p>\n

        Please verify that your mount uses a V3 controller with a 6-pin AUX connection before ordering.<\/strong><\/p>\n","protected":false},"featured_media":3525,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[15],"product_tag":[],"class_list":["post-3527","product","type-product","status-publish","has-post-thumbnail","product_cat-bez-kategorii","first","outofstock","taxable","shipping-taxable","purchasable","product-type-simple"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/product\/3527","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/comments?post=3527"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/media\/3525"}],"wp:attachment":[{"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/media?parent=3527"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/product_brand?post=3527"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=3527"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/skyswitchpro.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=3527"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}